Collection: Camozzi Series 52 Guided Rodless Pneumatic Cylinders

Technical information & FAQs

Camozzi Series 52 Guided Rodless Pneumatic Cylinders

Camozzi Series 52 rodless pneumatic cylinders are designed for linear-motion applications where the moving carriage must do more than simply travel from one end of the stroke to the other. Alongside the basic version, Camozzi offers slide-bearing and roller-bearing guided configurations to support higher external loads and resist the bending and torsional forces created by offset tooling.

This makes Series 52 especially relevant to transfer systems, handling equipment, positioning mechanisms and long-travel automation where the carriage is expected to support and control the moving load directly.

Series 52 Technical Specification

Manufacturer	Camozzi Automation
Series	52
Product Category	Guided rodless pneumatic cylinders
Bore Sizes	25, 32, 40, 50 and 63 mm
Operation	Double acting
Position Detection	Magnetic
Cushioning	Adjustable pneumatic end cushioning
Main Versions	Basic, slide bearing and roller bearing
Carriage Options	Standard or short carriage
Profile	Anodised aluminium
Seals	NBR and polyurethane
Operating Pressure	1 to 8 bar; 1.5 to 8 bar for 25 mm roller-bearing version
Operating Speed	10 to 1000 mm/s without load
Operating Temperature	-10°C to +70°C

Three Ways to Support the Moving Load

The most important Series 52 buying decision is the carriage guidance system. Camozzi divides the range into three principal versions, each intended for a different level of mechanical loading.

Series 52 Version	Code	Best Suited To
Basic	M	Applications where the external mechanism provides most of the load guidance
Slide Bearing	G	Loads requiring increased carriage support and resistance to external moments
Roller Bearing	R	Higher-load or higher-speed guided movement requiring greater carriage capability

The roller-bearing version is available on 25, 32 and 40 mm bore pneumatic cylinders. Camozzi does not offer the R configuration on the 50 and 63 mm sizes. :contentReference[oaicite:1]{index=1}

Why the Bearing Version Matters

A rodless pneumatic cylinder can be exposed to forces that a conventional piston-rod cylinder does not experience in the same way. The moving carriage may have to support vertical load while simultaneously resisting pitch, yaw or rolling moments created by tooling mounted away from the carriage centreline.

For this reason, Series 52 selection should consider the direction and position of the load as well as its weight. Camozzi publishes different allowable force and torque values for the basic, slide-bearing and roller-bearing versions, with the guided models providing substantially greater resistance to external moments. :contentReference[oaicite:2]{index=2}

Standard or Short Carriage?

Every main Series 52 configuration can be supplied with a standard or shortened carriage. The short-carriage option reduces the overall moving assembly and can be useful where machine packaging is tight, but the permissible moment capability differs from the standard carriage.

The correct carriage should therefore be selected from the actual mechanical load rather than simply choosing the physically smaller option.

Long Strokes Up to Approximately Six Metres

Bore	Maximum Stroke with Standard Carriage
25 mm	6000 mm
32 mm	5950 mm
40 mm	5900 mm
50 mm	5900 mm
63 mm	5880 mm

Short-carriage versions are specified up to 6000 mm stroke. On long installations, profile support and deflection become part of the cylinder selection, so intermediate support brackets may be required depending on load and unsupported distance. :contentReference[oaicite:3]{index=3}

Air Supply From One End Only

Series 52 can be specified so both cylinder chambers are supplied from one end of the actuator. This is particularly useful on long-stroke machinery because it can simplify tubing routes and reduce the need to run pneumatic lines to opposite ends of the machine.

Camozzi identifies operation code 8 for double-acting cushioned Series 52 pneumatic cylinders with one-sided air supply, while code 2 uses connections from both sides. :contentReference[oaicite:4]{index=4}

Series 52 Pneumatic Connections

Bore	Pneumatic Port
25 mm	G1/8
32 mm	G1/8
40 mm	G1/4
50 mm	G3/8
63 mm	G3/8

When Series 52 Is the Better Rodless Choice

Series 52 becomes particularly attractive when the moving carriage itself must support and guide tooling. If the machine already uses a separate linear guide, the basic M version may be sufficient. If the pneumatic cylinder needs to deal with greater external load and moments directly, the G slide-bearing or R roller-bearing versions provide more capable guidance.

That makes Series 52 a strong solution for pick-and-place movements, transfer equipment, loading systems and long-travel automation where the actuator and linear guide need to work as one assembly.

Series 52 Selection Questions

Should I choose M, G or R for my machine?

Choose from the forces acting on the carriage, not simply the pneumatic cylinder bore. M is the basic version, G adds slide-bearing guidance and R uses roller bearings for higher guided-load capability. The applied bending and torsional moments should be checked against Camozzi's published limits before ordering.

Can I mount tooling directly onto the Series 52 carriage?

Yes, but the permissible external load and moments depend on the selected carriage and bearing version. Tooling positioned away from the carriage centre creates additional leverage and may require a guided G or R configuration even if the actual load weight appears modest.

Why would I order the one-side air-supply version?

On a long machine it can simplify installation considerably by keeping the pneumatic connections at one end of the Series 52 rather than routing pipework to both ends of the actuator.

Can the short carriage replace a standard carriage directly?

Not simply on physical size alone. The shorter carriage changes the load and moment capability of the assembly, so the mechanical requirements should be checked before changing from a standard P carriage to the shorter C configuration.

I'm running the carriage quickly with a heavy offset load. Is pneumatic cushioning enough?

Not always. Camozzi states that where the application falls outside the published end-cushion limits, external shock absorbers should be used and positioned in line with the centre of the moving mass. :contentReference[oaicite:5]{index=5}

Request Quote

180 pneumatic cylinder products in this range.

Camozzi
52G2P50A0350
50mm bore x 350mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P50A0350

£1,172.28 EX VAT

£1,406.74 INC VAT

View Details
Camozzi
52G2P40A1200
40mm bore x 1200mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P40A1200

£1,168.02 EX VAT

£1,401.62 INC VAT

View Details
Camozzi
52G2P40A0950
40mm bore x 950mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P40A0950

£1,167.75 EX VAT

£1,401.30 INC VAT

View Details
Camozzi
52G2P32A2300
32mm bore x 2300mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P32A2300

£1,164.31 EX VAT

£1,397.17 INC VAT

View Details
Camozzi
52G8P32A2100
32mm bore x 2100mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G8P32A2100

£1,147.96 EX VAT

£1,377.55 INC VAT

View Details
Camozzi
52G2P25A1450
25mm bore x 1450mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P25A1450

£1,142.60 EX VAT

£1,371.12 INC VAT

View Details
Camozzi
52G2P25A1430
25mm bore x 1430mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P25A1430

£1,139.53 EX VAT

£1,367.44 INC VAT

View Details
Camozzi
52M2P32A4000
32mm bore x 4000mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52M2P32A4000

£1,111.51 EX VAT

£1,333.81 INC VAT

View Details
Camozzi
52G2P40A0800
40mm bore x 800mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P40A0800

£1,108.47 EX VAT

£1,330.16 INC VAT

View Details
Camozzi
52G2P40A0700
40mm bore x 700mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P40A0700

£1,108.47 EX VAT

£1,330.16 INC VAT

View Details
Camozzi
52G2P40A0750
40mm bore x 750mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P40A0750

£1,100.41 EX VAT

£1,320.49 INC VAT

View Details
Camozzi
52R2P25A0200
25mm bore x 200mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52R2P25A0200

£1,094.36 EX VAT

£1,313.23 INC VAT

View Details
Camozzi
52G8P40A0750
40mm bore x 750mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G8P40A0750

£1,092.70 EX VAT

£1,311.24 INC VAT

View Details
Camozzi
52M2C50A0635
50mm bore x 635mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52M2C50A0635

£1,068.82 EX VAT

£1,282.58 INC VAT

View Details
Camozzi
52R2P25A0100
25mm bore x 100mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52R2P25A0100

£1,067.42 EX VAT

£1,280.90 INC VAT

View Details
Camozzi
52G2P32A1600
32mm bore x 1600mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P32A1600

£1,039.71 EX VAT

£1,247.65 INC VAT

View Details
Camozzi
52G2P32A1525
32mm bore x 1525mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P32A1525

£1,039.71 EX VAT

£1,247.65 INC VAT

View Details
Camozzi
52G2P40A0500
40mm bore x 500mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P40A0500

£1,019.40 EX VAT

£1,223.28 INC VAT

View Details
Camozzi
52G2P40A0250
40mm bore x 250mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P40A0250

£1,019.40 EX VAT

£1,223.28 INC VAT

View Details
Camozzi
52M2C50A0500
50mm bore x 500mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52M2C50A0500

£1,015.36 EX VAT

£1,218.43 INC VAT

View Details
Camozzi
52G2P40A0600
40mm bore x 600mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P40A0600

£1,000.25 EX VAT

£1,200.30 INC VAT

View Details
Camozzi
52G8C25A0350
25mm bore x 350mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G8C25A0350

£996.40 EX VAT

£1,195.68 INC VAT

View Details
Camozzi
52G2P25A1700
25mm bore x 1700mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P25A1700

£992.28 EX VAT

£1,190.74 INC VAT

View Details
Camozzi
52G8P32A1200
32mm bore x 1200mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G8P32A1200

£988.57 EX VAT

£1,186.28 INC VAT

View Details
Camozzi
52M2C40A1750
40mm bore x 1750mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52M2C40A1750

£969.26 EX VAT

£1,163.11 INC VAT

View Details
Camozzi
52G2P32A1150
32mm bore x 1150mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P32A1150

£959.64 EX VAT

£1,151.57 INC VAT

View Details
Camozzi
52G2P32A1400
32mm bore x 1400mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P32A1400

£956.99 EX VAT

£1,148.39 INC VAT

View Details
Camozzi
52G2P25A0600
25mm bore x 600mm stroke
Manufacturer Standard | Rodless Pneumatic Cylinder
Manufacturer Part Number 52G2P25A0600

£951.08 EX VAT

£1,141.30 INC VAT

View Details