Collection: Camozzi Series QPR Non-Rotating Pneumatic Cylinders

Technical information & FAQs

Camozzi Series QPR Non-Rotating Pneumatic Cylinders

Camozzi Series QPR pneumatic cylinders are designed for short linear movements where attached tooling must stay correctly orientated throughout the stroke. Built-in non-rotating guides restrict piston-rod rotation, making QPR particularly useful for feeding, handling, locating and positioning tasks where a conventional short-stroke pneumatic cylinder could allow unwanted angular movement.

The compact aluminium-profile design is available from 12 to 100 mm bore, allowing the anti-rotation concept to be used across a wide range of force requirements. Series QPR pneumatic cylinders are double acting and magnetic, with standard and through-rod configurations available.

Series QPR Technical Data

Manufacturer	Camozzi Automation
Series	QPR
Product Category	Non-rotating short-stroke pneumatic cylinders
Construction	Compact profile with non-rotating guides
Bore Sizes	12, 16, 20, 25, 32, 40, 50, 63, 80 and 100 mm
Operation	Double acting
Through-Rod Version	Available
Position Detection	Magnetic
Body	Anodised aluminium
Piston Rod	Rolled stainless steel
Piston Seals	Polyurethane
Operating Pressure	1 to 10 bar
Operating Temperature	0°C to 80°C; down to -20°C with dry air
Sensor Use	Minimum 10 mm stroke for magnetic sensor operation
End Stop	Must be provided externally

Keep Tooling Aligned During the Stroke

The defining advantage of Series QPR is not simply its compact size. The pneumatic cylinder is designed to resist piston-rod rotation so attached tooling retains its angular position as the cylinder extends and retracts.

That becomes important when the piston rod carries a finger, stop, pusher, locator or other component whose orientation affects the machine process. A standard pneumatic cylinder may provide the correct linear movement while still allowing the attached part to rotate; QPR is intended to control that additional degree of movement.

Where QPR Makes Sense

Camozzi specifically identifies supply operations and handling equipment as suitable applications for the QPR non-rotating design. In practice, the same characteristic can also be valuable in compact positioning, feeding and locating mechanisms where repeatable alignment is required.

For machine builders, this can avoid adding a separate external anti-rotation mechanism around a conventional pneumatic cylinder. For maintenance engineers, it is an important feature to preserve when replacing an existing QPR actuator.

Stroke Capacity Depends on Bore Size

Bore	Series QPR Stroke Range
12 mm	1 to 50 mm
16 mm	1 to 75 mm
20–100 mm	1 to 100 mm

Series QPR therefore remains firmly focused on short-stroke movement. Its maximum travel is intentionally lower than the standard QP range because the additional non-rotating guidance changes the mechanical construction of the pneumatic cylinder.

Ten Bore Sizes, One Anti-Rotation Concept

QPR covers the same broad 12 to 100 mm bore spectrum as the QP family. This gives engineers considerable freedom to select the required pneumatic force while retaining the non-rotating mechanism.

A small-bore QPR can perform lightweight handling or locating duties, while 63, 80 and 100 mm versions allow much greater thrust where a short but forceful aligned movement is required.

Standard or Through-Rod QPR

Camozzi offers QPR as a conventional double-acting pneumatic cylinder and as a double-acting through-rod configuration. The through-rod version extends the rod from both sides while retaining the QPR non-rotating construction.

These are mechanically different products and should be selected according to the machine design rather than treated as interchangeable variants of the same pneumatic cylinder.

Magnetic Sensors Within the Compact Profile

Guides machined into three sides of the external aluminium profile provide locations for compatible position sensors. This keeps the sensing arrangement close to the pneumatic cylinder body and avoids large external switch brackets.

Camozzi specifies a minimum stroke of 10 mm for magnetic sensor use. That matters because QPR itself can be manufactured with strokes starting from only 1 mm.

An External End Stop Is Required

Camozzi specifies that the end stop for Series QPR must be provided externally by the machine. The pneumatic cylinder should therefore not be treated as the final uncontrolled mechanical stop for the moving assembly.

This point should be considered at the design stage and preserved when replacing an existing QPR installation, particularly where tooling is travelling quickly or carrying additional mass.

QP or QPR?

Choose Series QP when the requirement is primarily compact short-stroke pneumatic movement. Choose Series QPR when that same movement must also resist piston-rod rotation.

The anti-rotation feature is not merely a cosmetic variation. If the original machine uses QPR to maintain the orientation of attached tooling, replacing it with a standard QP pneumatic cylinder can change how that tooling behaves during operation.

Series QPR Application & Ordering Questions

My pneumatic cylinder pushes a rectangular component into position. Why does anti-rotation matter?

If the component is attached directly to the piston rod, rod rotation can alter its orientation as it moves. Series QPR guides the movement so the attached component remains aligned more consistently throughout the stroke.

Can QPR replace a standard QP pneumatic cylinder?

Potentially in a redesigned application, but they should not be treated as identical. QPR incorporates additional non-rotating guidance and has different maximum stroke limits. Mechanical dimensions and the existing mounting arrangement should be checked before changing between the two families.

I need 150 mm stroke with anti-rotation. Can I use Series QPR?

No standard QPR configuration reaches 150 mm. Maximum stroke is 50 mm at 12 mm bore, 75 mm at 16 mm bore and 100 mm from 20 to 100 mm bore. A different guided pneumatic cylinder solution should be considered where greater anti-rotating travel is required.

Can I use a magnetic switch on a very short QPR pneumatic cylinder?

Only where the stroke meets Camozzi's sensor requirement. The pneumatic cylinder itself can have a stroke below 10 mm, but Camozzi specifies 10 mm as the minimum stroke for sensor use.

Should the machine provide its own mechanical stop?

Yes. Camozzi explicitly requires the Series QPR end stop to be provided externally, so the surrounding mechanism should incorporate an appropriate stop for the intended movement.

Would QPR suit a pneumatic feeder or handling mechanism?

Yes. Camozzi specifically identifies supply operations and handling equipment as applications where the QPR non-rotating guides are advantageous.

Request Quote

133 pneumatic cylinder products in this range.

Camozzi
QPR2A063A075
63mm bore x 75mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A063A075

£195.80 EX VAT

£234.96 INC VAT

View Details
Camozzi
QPR2A063A050
63mm bore x 50mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A063A050

£188.60 EX VAT

£226.32 INC VAT

View Details
Camozzi
QPR2A063A045
63mm bore x 45mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A063A045

£187.12 EX VAT

£224.54 INC VAT

View Details
Camozzi
QPR2A063A025EX
63mm bore x 25mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A063A025EX

£185.81 EX VAT

£222.97 INC VAT

View Details
Camozzi
QPR2A063A040
63mm bore x 40mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A063A040

£185.74 EX VAT

£222.89 INC VAT

View Details
Camozzi
QPR2A063A035
63mm bore x 35mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A063A035

£184.37 EX VAT

£221.24 INC VAT

View Details
Camozzi
QPR2A063A030
63mm bore x 30mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A063A030

£182.85 EX VAT

£219.42 INC VAT

View Details
Camozzi
QPR2A063A025
63mm bore x 25mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A063A025

£181.38 EX VAT

£217.66 INC VAT

View Details
Camozzi
QPR2A063A020
63mm bore x 20mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A063A020

£180.03 EX VAT

£216.04 INC VAT

View Details
Camozzi
QPR2A063A015
63mm bore x 15mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A063A015

£178.64 EX VAT

£214.37 INC VAT

View Details
Camozzi
QPR2A063A010
63mm bore x 10mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A063A010

£177.09 EX VAT

£212.51 INC VAT

View Details
Camozzi
QPR2A063A005
63mm bore x 5mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A063A005

£175.72 EX VAT

£210.86 INC VAT

View Details
Camozzi
QPR2A050A080
50mm bore x 80mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A080

£172.03 EX VAT

£206.44 INC VAT

View Details
Camozzi
QPR2A050A060
50mm bore x 60mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A060

£167.35 EX VAT

£200.82 INC VAT

View Details
Camozzi
QPR2A050A100
50mm bore x 100mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A100

£163.63 EX VAT

£196.36 INC VAT

View Details
Camozzi
QPR3A032A030
32mm bore x 30mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR3A032A030

£162.42 EX VAT

£194.90 INC VAT

View Details
Camozzi
QPR2A050A075
50mm bore x 75mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A075

£159.39 EX VAT

£191.27 INC VAT

View Details
Camozzi
QPR2A050A050
50mm bore x 50mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A050

£154.55 EX VAT

£185.46 INC VAT

View Details
Camozzi
QPR2A050A045
50mm bore x 45mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A045

£153.64 EX VAT

£184.37 INC VAT

View Details
Camozzi
QPR2A050A040
50mm bore x 40mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A040

£152.58 EX VAT

£183.10 INC VAT

View Details
Camozzi
QPR2A050A035
50mm bore x 35mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A035

£151.67 EX VAT

£182.00 INC VAT

View Details
Camozzi
QPR2A050A030
50mm bore x 30mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A030

£150.66 EX VAT

£180.79 INC VAT

View Details
Camozzi
QPR2A050A025
50mm bore x 25mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A025

£149.68 EX VAT

£179.62 INC VAT

View Details
Camozzi
QPR2A040A080
40mm bore x 80mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A040A080

£149.08 EX VAT

£178.90 INC VAT

View Details
Camozzi
QPR2A050A020
50mm bore x 20mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A020

£148.71 EX VAT

£178.45 INC VAT

View Details
Camozzi
QPR2A050A015
50mm bore x 15mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A015

£147.78 EX VAT

£177.34 INC VAT

View Details
Camozzi
QPR2A050A010
50mm bore x 10mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A010

£146.63 EX VAT

£175.96 INC VAT

View Details
Camozzi
QPR2A050A005
50mm bore x 5mm stroke
ISO 21287 | ISO 21287 Compact Pneumatic Cylinder
Manufacturer Part Number QPR2A050A005

£145.72 EX VAT

£174.86 INC VAT

View Details